Show Chrome

• Universal, replacement foam windsocks
• Protective vinyl cover available separately
• Sold each

• Replace OEM black plastic vents with chrome-plated ABS
• Snap easily into place
• Sold in pairs of uppers and pairs of lowers

• Reusable plastic rivets for Gold Wing fairings
• Available in standard, low-profile or flush
• Sold in 10-pack

• Inexpensive alternative to OEM grommets
• Used on most fairings
• Sold in sets of five: two large, two small and one slotted

• Replace OEM black plastic vents with chrome-plated ABS
• Snap easily into place
• Sold in pairs of uppers and pairs of lowers

• Mounts over the black plastic OEM piece to provide instant character and definition to the gauge area
• Attaches quickly and securely with double-sided adhesive tape

• Reinforced to prevent breakage

• Chrome ABS replacement for boring, black plastic OEM trim
• Mounts with existing screws
• Also available with raised rubber inserts for a more custom look
• Sold in pairs

• Chrome-plated ABS replacement for the gray plastic OEM cowl
• Designed to work with OEM and Big Bike Parts lower fog lightsPART #DS282118
• Mount with OEM hardware

• Covers comfortably fit most pull-behind trailers from Bushtec 56" x 48" shaped trailers to the longer 70" Escapades
• Come with UltraGards proven double-stitched interlocking seams, full elastic hem and handy zippered storage pouch
• Fit most trailers

• Water-resistant, lightweight, polyurethane-coated polyester construction
• UV stability prevents material breakdown and fading
• Scorch-resistant exhaust protection
• Elastic hem
• SoftTek windshield protection
• Ultragard vent system
• Zippered windshield and sissybar pockets
• Available in different styles in the following sizes: scooter (S), large cruiser (L), extra-large bagger (XL), trike (T) and Cruiser Trike (CT)
• Also available for Can Am Spyder RT

• Water-resistant, lightweight, polyurethane-coated polyester construction
• UV stability prevents material breakdown and fading
• Scorch-resistant exhaust protection
• Elastic hem
• SoftTek windshield protection
• Ultragard vent system
• Zippered windshield and sissybar pockets
• Available in different styles in the following sizes: scooter (S), large cruiser (L), extra-large bagger (XL), trike (T) and Cruiser Trike (CT)
• Also available for Can Am Spyder RT

• Water-resistant, lightweight, polyurethane-coated polyester construction
• UV stability prevents material breakdown and fading
• Scorch-resistant exhaust protection
• Elastic hem
• SoftTek windshield protection
• Ultragard vent system
• Zippered windshield and sissybar pockets
• Available in different styles in the following sizes: scooter (S), large cruiser (L), extra-large bagger (XL), trike (T) and Cruiser Trike (CT)
• Also available for Can Am Spyder RT

• Water-resistant, lightweight polyester construction
• Scorch-resistant exhaust protection
• SoftTek windshield protection
• Ultragard vent system
• Now available in cranberry

• Isolates wiring between bike and trailer to prevent electrical feedback into the bike
• Plugs into existing wiring

• Chrome stamped-steel accent

• 12V handlebar-mounted USB charger for MP3, GPS, iPads and smartphones
• Allows the simultaneous use of 2.1A and 1.0A ports
• Handlebar clamp attachment fits either 7/8" or 1" handlebar
• Socket assembly can also be mounted into flat panel

• Incorporate three rocker-style switches with amber LEDs
• Offer convenient control of auxiliary driving, fog or marker lights
• Specifically designed to fit the OEM master cylinder for a clean, integrated look
• Available in chrome or matte black

• Convert stock incandescent turn signals into highly-visible amber LED
• Unique honeycomb lens
• LED circuit boards plug directly into OEM bulb socket
• Circuit boards feature polished chrome face plate to enhance illumination
• Honda and Yamaha versions have 21 LEDs each; Kawasaki and Suzuki versions have 18 each
• Mount easily with OEM hardware
• Require dual load equalizer (PART #2050-0044) to return signals to stock flash rate; Honda models require one dual load equalizer per bike, while all other models require one per kit
• Sold in pairs

• Replacement bulbs for a variety of uses
• Sold each

• Vast improvement on OEM cornering lights

• Allows LED turn signals to flash at stock rate when replacing incandescent signals
• Plug-and-go

• Trunk light offers running light, brake light and turn signal functionality in a single compact unit
• Uses small ultra-efficient high-intensity LEDs, offering superb brightness with low power usage
• The LED assemblies are enclosed in weather-resistant pods that are sealed to provide all-weather protection and maintenance-free lighting
• Superior functionality combined with a stylish contoured chrome housing that mounts low enough to allow fitment of luggage racks
• Attaches with double-sided tape for a secure installation
• Requires drilling to run the wire lead which mounts to existing LED wiring with T-Taps; no additional components are needed

• Cast aluminum light housings are permanently attached to the formed steel elliptical light bar without welds; weld-free design eliminates the possibility that vibration could detach the lights
• Internally routed wiring ensures a clean look
• Available with 31/2" 55W halogen lights, 23/8", 50W focused beam mini halogen lights or 31/2" LED lights
• Include an on/off switch that can be mounted in a side cover
• Turn signal relocation inserts allow replacement of OEM turn signals with any lights with 8mm or 3/8" threaded stud mount; sold in pairs

NOTE: Kits do not include turn signal adapters (sold separately).

• Stylish, universal visor fits all cruisers with 7" headlights

• Pair of highly polished 31/2" spotlights with high-intensity 55W H3 halogen bulbs
• Complete with mounting bar bracket; mounts on fork under headlight
• Wiring harness with relay included
• Easily adjusts for dimming

• Cast aluminum light housings are permanently attached to the formed steel elliptical light bar without welds; weld-free design eliminates the possibility that vibration could detach the lights
• Internally routed wiring ensures a clean look
• Available with 31/2" 55W halogen lights, 23/8", 50W focused beam mini halogen lights or 31/2" LED lights
• Include an on/off switch that can be mounted in a side cover
• Turn signal relocation inserts allow replacement of OEM turn signals with any lights with 8mm or 3/8" threaded stud mount; sold in pairs

NOTE: Kits do not include turn signal adapters (sold separately).

• Cast aluminum light housings are permanently attached to the formed steel elliptical light bar without welds; weld-free design eliminates the possibility that vibration could detach the lights
• Internally routed wiring ensures a clean look
• Available with 31/2" 55W halogen lights, 23/8", 50W focused beam mini halogen lights or 31/2" LED lights
• Include an on/off switch that can be mounted in a side cover
• Turn signal relocation inserts allow replacement of OEM turn signals with any lights with 8mm or 3/8" threaded stud mount; sold in pairs

NOTE: Kits do not include turn signal adapters (sold separately).

• Cast aluminum light housings are permanently attached to the formed steel elliptical light bar without welds; weld-free design eliminates the possibility that vibration could detach the lights
• Internally routed wiring ensures a clean look
• Available with 31/2" 55W halogen lights, 23/8", 50W focused beam mini halogen lights or 31/2" LED lights
• Include an on/off switch that can be mounted in a side cover
• Turn signal relocation inserts allow replacement of OEM turn signals with any lights with 8mm or 3/8" threaded stud mount; sold in pairs

NOTE: Kits do not include turn signal adapters (sold separately).

• Cast aluminum light housings are permanently attached to the formed steel elliptical light bar without welds; weld-free design eliminates the possibility that vibration could detach the lights
• Internally routed wiring ensures a clean look
• Available with 31/2" 55W halogen lights, 23/8", 50W focused beam mini halogen lights or 31/2" LED lights
• Include an on/off switch that can be mounted in a side cover
• Turn signal relocation inserts allow replacement of OEM turn signals with any lights with 8mm or 3/8" threaded stud mount; sold in pairs

NOTE: Kits do not include turn signal adapters (sold separately).